GABRIEL KERAMIK AB
2
Tests and approvals
Technical description
The Gabriel tiled stoves are built with an ingenious
module system of fi re-proof material, consisting of an
inner core and an outer mantle, which are separated
from each other. The inner core absorbs a large part
of the heat expansion and reduces the furnace heat
movement. The effi cient 5-channel fl ue gas principle
gives a high energy effi ciency and radiates a uniform
and pleasant heat into the room over a longer
period.
The Gabriel tiled stoves can either be rear connected
to an existing approved chimney, or top mounted
with a prefabricated module steel or precasted block
chimney.
A building permit is needed when building a new tiled
stove. Before starting to fi re, the tiled stove installation
has to be inspected and approved by the Building
Control Offi cer. (See local and national regulations
regarding installation of fi re places.)
The Gabriel tiled stoves are CE-approved by the
accredited test laboratory SP Technical Research
Institute of Sweden, and fulfi l the environmental and
safety requirements stipulated in the new European
standard for “Slow heat release appliance fi red by
solid fuel”.
New installation / building registration
A building permit from the local housing authorities is required when
build-ing a tiled stove. You shall also consult your chimney sweep before
building the stove.
Weight from 1300 to 1800 kg. Bearing support is required.
EU-declaration of conformity
Products covered by this declaration
Product type:
Slow heat release appliance fi red by
solid fuel
Models:
Rectangular tiled stoves (800 series)
Round tiled stoves (300 series)
Round tiled stoves Studio (400 series )
In conformity with:
EU building directive CPD89/106/EEG
Comply with EU-standard: EN 15250
Intended use:
Domestic heating
Fuel: Wood
Manufacturer:
Gabriel Keramik AB
Address:
Strandavägen 62,
SE-380 52 Timmernabben
Production site:
Timmernabben, Sweden
Test laboratory (0402): SP Technical Research Institute of Sweden
Address:
Box 857, SE-50115 Borås, Sweden
Test report no.
0402-CPD-502101
Lars
Burmeister
Manager Director, Gabriel Keramik AB
Gabriel Keramik AB
Strandavägen 62
SE-380 52 Timmernabben, Sweden
08
EN 15250:2007
Slow heat release appliance
fi red by solid fuel
Follow the manufacturers instruction and main-
tenance manual. Use only recommended fuel.
Total fuel loading mass
Approx. 11 kg
Single fuel batch
Approx. 3 kg
Distance to adjacent combustible material:
Rectangular: Rear/side
35/300 mm
Round:
50 mm
CO
emission:
0.083%
Flue gas temperature (mean):
80 °C
Flue gas mass fl ue:
16.2 g/s
Flue gas draught:
12.1 Pa
Connection to shared chimney:
Yes
Thermal output:
165 MJ
Thermal storage capacity:
100% 50% 25%
Peak
After: 3.9 h
13.0 h 21.1 h
Energy effi ciency:
93.4%
Fuel type:
Wood logs
CE-marking
The Gabriel tiled stoves are Swedish products and
fulfi ll the requirements for CE-marking, meaning
that they comply with EU health, environmental and
safety requirements. CE stands for Communaútes
Européennes. CE-marked products can be produced
and sold in every member country of EU and EES
community without any national product restrictions.
A CE-marked product is normally provided with the
document
“EU declaration of conformity”
in
which the manufacturer assures that the product fulfi lls
the requirements designated by EU.
Fan for effi cient
heat radiation
Low temperature
fl ue gas outlet
Inner core
Outer mantle
Expansion area
Fan controlled direct
heat through channels
in the hot air cassette for
effi cient heat radiation
Connection for combustion
air from the outside
Extra large glass
door enhances the
fi re side comfort
Heat accumulating,
dense, fi re-resistant
material for long-
lasting heat radiation
The traditional
5-channel fl ue gas
principle is still
incomparable
Airfl ow on the
inside keeps the
glass cleaner
