Inertia Electric Radiators
3
2.- INSTRUCTIONS ON INSTALLATION
- Open the carton at the indicated side. The screws are in the accessories bag. Turn the carton upside down to allow the heater to
stand. Check that it is the correct model and that it is in good condition.
- To obtain optimum performances it is necessary to maintain a minimum clearance of 15 cm between the radiator and any
inflammable material as furniture, curtains etc. See figure.
shelf
minimum 15cm
Closest
object to the
right end
minimum 25cm
minimum 10cm
Closest
object to the
left end
minimum15cm
- The studs and screws are in the accessories bag.
- Hung the unit on the hooks of the brackets.
- By turning the screw the metallic square will go downwards, retaining the heater. Repeat this on the other
bracket.
Use the heater as a
template and mark the
fixing points on the wall
using a pencil through
the two fixing holes in
the square brackets.
Position and fix the brackets at the correct distance from
the floor and hang the unit on the hooks of the brackets.
and mark the wall. Use the polystyrene packaging to level
the heater and protect the floor.
