Inertia Electric Radiators
2
INSTALLATION INSTRUCTIONS
1.- WARNING
•
The warranty of the heater will not cover any damage caused by non observance of any of these instructions.
•
This guide must be kept and given to any new owner.
•
Please check that the voltage in the rating label fits the power supply.
•
Any reinstallation should be carried out by trained personnel.
•
The use of these heaters is forbidden in any area where there is a presence of gases, explosives or inflammable objects.
•
DO NOT USE THIS HEATER TO DRY CLOTHES.
•
The surfaces of this heater can be hot, so young children should not be left unsupervised in the vicinity of the heater.
•
Children should be supervised to ensure they do not play with the appliance.
•
Neither the connecting cable nor any other object must come into contact with the hot unit.
•
Do not cover this heater at any time.
•
The air outlet at the top of the thermal radiator and the air inlet at the bottom are provided to ensure the most efficient operation
of the appliance. They also protect the heater from overheating; therefore, it is essential that at no time are they covered.
•
This heater should be switched off at the isolating switch before any repair work is carried out.
•
The thermal radiator should not be installed just below an electrical socket.
•
The appliance must be installed in such a way that it is impossible for anyone using a bath or shower, to touch the controls.
•
The installation must be carried out in accordance with the current electrical regulations.
•
The heater is fitted with a flexible cable size 3 x 1.00 mm2 for electrical connection. It may be used to connect the heater to the
fixed wiring of the premised through a suitable connection box positioned adjacent to the heater.
•
The supply circuit to the heater must incorporate a double pole isolating switch having a contact separation of at least 3 mm.
•
If the flexible power cable for this unit is damaged, it may only be replaced by a repair workshop recognised by the manufacturer,
as special tools are necessary.
•
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
•
This appliance must be earthed.
•
All models are supplied with an electrical interrupt cut-out. This will switch off the heater if, for any reason, it overheats. Should
the cut-out operate, turn the heater off and remove the cause for the overheating. The cut-out will be reset automatically.
•
The presence of air particles of smoke, dust and other pollutants could, in time, discolour the walls and surfaces around the
heater.
•
This heater is filled with a precise quantity of special oil. Repairs requiring the opening of the oil container are only to be made by
the manufacturer or his service agent who should be contacted if there is an oil leakage.
•
Regulations concerning the disposal of oil when scrapping the appliance have to be followed.
MODELS
RF3P
RF3F
RF3E
RF4P
RF4F
RF4E
RF5P
RF5F
RF5E
RF6P
RF6F
RF6E
RF8P
RF8F
RF8E
RF10P
RF10F
RF10E
RF12P
RF12F
RF12E
MODULES
3
4
5
6
8
10
12
W (cm)
33.5
41.5
49.5
57.5
73.5
89.5
105.5
D (cm)
10 plus 2 cm separated from the wall
H (cm)
58
WEIGHT (kg)
7,5
9,5
11,5
13,5
17,5
21,5
25,5
VOLTAGE
220-240V~
INPUT (W)
375
500
625
750
1000
1250
1500
