Elnur
powered by Gabarrón | INGENIUM WIFI Thermal Radiators | Installation Guide
5
3.2. Setting The Time
We start by first setting the Day and Time.
3.2.1
You can do this by Press & Holding the
Config/
Prog
. button until the following is shown. Press &
Release the
Config/Prog
button 7 times again to
advance through the 7th days programming.
0:00
0:00
0
0:00
0:
00
00
1
1
0:00
9:00
3.2.2
. When pressing
Config/Prog
button when the
7th day programming is displayed, you enter in the
Time Setting. The day of the week starts to flash. Using
the "+" and "-" buttons select today's date. 1=Monday,
2=Tuesday, Etc. and Press the OK/Mode button.
0:00
0:00
0
0:00
0:
00
00
11
0:00
9:00
3.2.3
. Now the hours start to flash. Press the "+" and "-"
button until you reach the correct time (hour) and Press
the
OK/Mode
button.
3.2.4
. Now the minutes start to flash. Press the "+" and
"-" button until you reach the correct time (minutes) and
Press the
OK/Mode
button.
0:00
0:00
0
0
:00
0:
00
00
1
1
0:00
9:00
0:00
0:00
0
0:00
0:
00
00
11
0:00
9:00
If the device is associated with a G-Control Hub, the adjustment of time is removed and the time in the G-Control
Hub is configured in the heater automatically.
3.3. Programming
Select Auto Mode. Within this mode, the setpoint temperature varies according to the weekly schedule setup in the
unit. Default programming is:
Comfort:
07:00 to 22:00 /
Eco:
00:00 to 07:00 & 22:00 to 00:00.
3.3.1
Press & Hold the
Config/Prog
. button until the following is shown. The first segment will start to flash.
By pressing the
OK/Mode
button you can select whether you want a Frost setting (5°C), Background setting
(17°C) or Comfort setting (19°C). Now press the "+" button to move to the next 1 hour time interval.
Note: These temperatures can be changed later without adjusting the times.
0:00
0:00
0
0
:00
0:
00
00
1
1
0:00
9:00
0:00
0:00
0
0:00
0:
00
00
1
1
0:00
9:00
3.1. On/Off
Once the heater is connected to a main supply you can turn the heater ON by switching the main ON/OFF switch
positioned at the rear right side of the heater as shown above.
