11
In case of overheating, if the unit produces smoke, smell
or unusual noises, turn it off immediately and check that
the pipe is free from obstacles. If the tube is free, contact
the service center for fixing it.
To avoid serious damage, do not walk on the power cord.
Disconnect the plug from the electrical outlet
immediately after use. Additionally it is advisable to wind
the power cord in order to ensure a better cleaning and to
avoid any risk of damage.
Do not immerse the motor unit in water or other liquids,
clean it with a damp cloth only.
Do not use the appliance if the dust bin is not installed.
Do not use the product without proper filtering system
assembled: this may seriously damage the engine
avoiding the warranty. Use only on dry surfaces.
Caution when using the device on the stairs.
CAUTION: while the unit is running, do not approach
the air inlet to ears, eyes, etc., or to fragile items such
as vases, tools, electronic machines.
DESCRIPTION G90003
1. Power button
2. Power cord rewind button 3. Suction nozzle
4. Dust bin
5. Handle
6. Resting hook
7. Air outlet filter
8. Flexible hose
9. Central pivot wheel
10. Hose handle
11. Air regulator
12. Telescopic tube
13. Brush
A. Dust bin release button
B. Dust bin cover lid
C. Opening lid button
D. Cyclone Pre-
filterL and M are protective plastics. Remove before using.
ASSEMBLING THE ACCESSORIES
-
Insert the hose (8) in the suction nozzle (3), pushing it until blocking. The flexible hose terminates in the
handle (10), a curved tube equipped with a hole for adjusting the air flow (11). With this controller you can
reduce or increase the suction power. Fit the telescopic tube (12) to the handle (10). The tube can be
extended pushing the black button present on the tube.
-
Attach the floor brush (13) (normal or parquet) or the nozzle to the extension tube. The nozzle can be
oriented horizontally or vertically depending on the type of area you need to clean and is equipped with a
mini-brush. Pull out the power cord to the desired length and plug it to the main electrical outlet.
OPERATING CONTROLS
-
Power on
: press the power button (1) and the device is turned on/off.
-
Cable rewind
: after use, unplug the appliance from the electrical outlet and press the button (2) to rewind
the power cord.
CAUTION
: when rewinding the power cord, it is recommended to pick up the plug to avoid whiplash.
