G-Tek 62 Series, Operating Manual, Page: 54 / 83

53
4.2.4.2 Factory Calibration
Device calibration parameters set by factory. User can restore the device to these factory
settings.
4.2.4.3 Configuration Reset
Configuration reset execution will reset all the channel configuration to its default value.
4.2.4.4 Factory Reset
Factory configurations are wiped off.
4.2.4.5 Software Upgrade
Note : Current software version does not contain this feature. It will be available in future version.
4.2.5 Screen Setup
Note : Current software version does not contain this feature. It will be available in future version.
4.2.6 Clear Memory
User can clear the memory of the device from this menu. Press clear memory it will ask the
username and password.
Figure 73 Clear Memory
Add “ Admin ” as username and “ admin@123 ” as password
If wrong password is entered, then following message will appear: