G-Tek 62 Series, Operating Manual, Page: 30 / 83

29
To setup preconfigured batch , fill batch information and click on button setup batch. It will start
batch on the set Start time and store data at every store interval. If preconfigured batch is set for
Recurring mode than the batch will start and stop every interval mentioned in Start and Stop
time.
Figure 28 Preconfigured batch
Fill the appropriate information in the relevant field to add new batch.
Notes:
➢
If batch is running when SD card memory is less than 500 MB and if it is stopped, new
batch cannot be started.
➢
If batch is preconfigured and user starts a new manual batch, the preconfigured batch will
be overridden by new manual batch and it will be discarded.