G-Tek 62 Series, Operating Manual, Page: 29 / 83

28
4.1.6 Create Batch
From “Create Batch” page, either manual batch or preconfigured batch can be started.
Table 4 Create Batch parameters
Column Name Description
Batch Name
Name of the Batch (allows maximum 50 characters)
Store Interval (Seconds)
Time interval at which Batch readings are stored -minimum 5
seconds and maximum 18 hours
Trend Interval (Seconds)
Trend interval of Batch. Trend interval must be within Store
Interval and maximum trend interval [Store Interval * maximum
number of readings in trend]
No. of readings in Trend Number of readings in trend -minimum 2 and maximum 500
Batch Type Select batch type - Manual or Preconfigured
Start Date Time
For “Preconfigured” batch type, select time to start Batch.
Batch start time must be less than batch stop time and must be
greater than current time + 5 minutes.
Stop Date Time
Stop time of Batch. Batch stop time must be greater than the
Batch start time.
In Manual batch type after saving the above configurations, batch can be started manually at any
time by pressing “Start” from the Digital View or Graph View.
Figure 27 Manual Batch config