14
TM/MC
ADJUSTMENT
WARNING:
Never operate the cutting
height adjustment handle roughly. Switch off the
tool and make sure that the blade has stopped
completely.
Adjust the cutting height
The cutting height is centrally adjusted by the
cutting height adjustment handle.
Different cutting heights can be selected as
follows:
1. Pull the adjusting handle outwards. (See Fig.
15)
2. Move it forwards or backwards to select the
desired cutting height.
3. Return adjusting handle back into plate.
Make sure the lever is secured in position.
From position 1 to position 7, the cutting
height ranges from 1.25 " to 3.75 ".
Adjust the self-propelled speed
This lawn mower features a self-propelled
function. The self-propelled speed also can be
changed by pushing the speed adjustment lever
forwards and backwards. It has 5 speeds for your
option, from 1.75 MPH to 3 MPH, the lever can
be stopped at the lever can be stopped at the
speed position desired for each operator. (See
Fig. 14)
OPERATION
To insert the battery pack
1. Open the battery pack cover and hold it in
place. (See Fig. 16)
2. Align the groove on the battery pack with the
corresponding ribs in the receptacle of the
device.
3. Depress the battery pack with moderate force
until it was locked in place (Make sure that
the battery handle is folded down).
4. Repeat the above procedure to assemble the
2nd battery pack.
5. Close the cover.
WARNING:
Make sure that the tool is
“POWER OFF”.
NOTE:
The tool can also work normally with only
one battery pack.
Battery Pack Y0L120BAT2.5 (See Fig. 26)
①
Lift handle
②
Main housing
③
Indicator button
④
Green LED lamps
⑤
Red LED lamp
Battery Pack Operation (See Fig. 27)
1. When you push the power indicator button,
the green LED lights will show the power
remaining. (see Fig. 27
①
)
2. When the battery pack over discharges or
remains very low power, the red LED light will
flash. (see Fig. 27
②
)
3. When the battery pack temperature is
exceeded, the red LED light will flash. Cool it
down for 10~20 minutes. (see Fig. 27
②
)
4. When there is fault with the battery pack, the
red LED light will flash. (see Fig. 27
②
)
5. Once the battery pack is correctly located
in the charger, the 4 green LED lights of the
battery pack will flash LED lights to indicate
the charging process. At the same time the
green LED light of the charger will flash
continuously during normal charging, while
the red LED light is still on. (see Fig. 27
③
)
To remove the battery pack from the tool
1. Open the battery pack cover and hold it in
place.
2. Press the battery pack release button, the
battery pack will spring out automatically.
（
See Fig. 17
）
3. Lift up the carrying handle and remove the
battery pack.
Safety Key
The machine is fitted with a safety key, this
prevents the accidental start up of your cordless
lawnmower.
The safety key has been designed to totally
disable the lawnmower when the key is removed.
(See Fig. 18)
If the safety key is lost or broken, please call the
G-FORCE PRO service hot-line at
1-833-818-4111.
To Switch ON:
1. Depress the center of the power ON/OFF
button and hold down for 2 seconds- The
green LED light will be ON.This means the
tool is powered on normally. (See Fig. 19
)
2. Depress the safety lock button and keep
it in place. Whilst pulling the blade-Stop/
Summary of Contents for PRO Y0LMX22S300
Page 4: ...4 TM MC Fig 5 Fig 7 Fig 9 Fig 11 Fig 6 Fig 8 Fig 10 Fig 12...
Page 5: ...5 120v LITHIUM ION TM MC Fig 14 Fig 16 Fig 18 Fig 20 Fig 15 Fig 19 Fig 17 Fig 13...
Page 23: ...23 120v LITHIUM ION TM MC Fig 5 Fig 7 Fig 9 Fig 11 Fig 6 Fig 8 Fig 10 Fig 12...
Page 24: ...24 TM MC Fig 14 Fig 16 Fig 18 Fig 20 Fig 15 Fig 19 Fig 17 Fig 13...
