16
TM/MC
the mower OFF and remove the battery. Check to
see if grass has collected beneath the deck and
clear it if necessary, then restart the mower.
Battery high temperature protection
The battery pack will generate heat during
operation. The heat dissipates more slowly in
hot weather. If the battery `temperature exceeds
more than 158˚ F during operation, the protection
circuit will immediately turn off the mower to
protect the battery pack from damage. Release
the bail handle, wait until the battery pack cools
down, then restart the mower.
Function of Grass Bag full indicator
1. If the grass bag is empty or it is not filled with
grass, the grass full indicator will open. (see
Fig. 22
①
)
2. If the grass bag is filled with grass the grass
full indicator will close. (see Fig. 22
②
)
Emptying the grass bag
When the grass bag full indicator starts to close
during grass cutting, it is time to empty the grass
bag.
NOTE:
Before taking off the grass bag, switch
OFF the power and wait until the blade has come
to a stop.
1. To take off the grass bag, use one hand to lift
up ejector flap and the other to grab onto the
carry handle. The ejector flap automatically
falls down after removing the grass bag and
closes off the rear chute opening.
2. Empty the grass debris in the grass bag, and
refit grass Bag.
NOTE:
If any grass residue is caught in the
discharge chute, clean it using a brush. Do not
remove grass debris in the discharge chute or on
the blade by hand or with your feet. Instead
use suitable tools such as a brush or broom. To
ensure that the cut grass can be collected into
grass bag, the discharge opening and inside the
discharge chute must be cleared of any blockage.
MAINTENANCE AND STORAGE
WARNING
！
Before performing any maintenance or cleaning
work, always ensure that the battery pack/safety
key has been removed and wait until the blade
has stopped completely and the tool has cooled
down.
Cleaning
Cleaning the product
– Use a soft brush to remove any accumulated
dust and debris. Wear safety glasses to
protect your eyes whilst cleaning.
– Wipe down the product enclosure with a
slightly damp cloth. Do not spray the unit with
water. Exposure to water may destroy the
switch unit and the electric motor.
Maintenance
NOTE:
Always wear gardening gloves when
handling or working near the sharp blades.
1) Keep all nuts, bolts and screws tight to be
sure that the machine is in safe working
condition.
2) Check the grass bag frequently for wear or
deterioration.
3) Examine the machine and replace worn or
damaged parts for safety.
Removing/Installing the blade (See Fig. 23 &
Fig. 24)
1. Using a wrench of correct size locate on the
blade bolt nut.
2. Wearing heavy gloves hold the blade fixed
and turn the wrench anti-clockwise and
remove the bolt.
3. Fitting the replacement blade correctly with
marking facing up and align pegs correctly
then fit the bolt and retighten the bolt securely
to torque 36- 43 Ft. Lb.
WARNING
！
Replace or re-sharpen the mowing blade at
the end of the mowing season. Always have
the mowing blade re-sharpened or replaced
by a customer service center (measurement
of imbalance).
Unbalanced blades will cause the lawn
mower to vibrate violently-risk of accident!
Summary of Contents for PRO Y0LMX22S300
Page 4: ...4 TM MC Fig 5 Fig 7 Fig 9 Fig 11 Fig 6 Fig 8 Fig 10 Fig 12...
Page 5: ...5 120v LITHIUM ION TM MC Fig 14 Fig 16 Fig 18 Fig 20 Fig 15 Fig 19 Fig 17 Fig 13...
Page 23: ...23 120v LITHIUM ION TM MC Fig 5 Fig 7 Fig 9 Fig 11 Fig 6 Fig 8 Fig 10 Fig 12...
Page 24: ...24 TM MC Fig 14 Fig 16 Fig 18 Fig 20 Fig 15 Fig 19 Fig 17 Fig 13...
