27
BOILER K
Original Instructions—rev.2011—in compliance with the paragraph 1.7.4 of the
Machinery Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 –
25065
Cazzago San Martino (Bs) –
Italia –
Tel. + 39 030 7451154 –
Fax. + 39 030 73 56 629
If you want to re
-
install the standard shaft assembly in your machine you will have to follow the same proce-
dure described in the pages 20, 21, 22, 23, 24 and 25.After that you will have to follow a different procedure
as described below.
Insert the standard VANE EXPANSION SHAFT and screw it inside the VANE GUIDING SHAFT until the
gap between the VANE GUIDING SHAFT and the thread of the VANE ABUTMENT CAP is 2mm as
shown in the photo #
1
.
When the correct position is set, remove the VANE ABUTMENT CAP come all the way back with the VANE
EXPANSION NUT(
2
).
