Original User Manual FUXTEC 20V cordless heat gun FX-E1HLP20
8
- Always check that the mains voltage corresponds to the voltage indicated on the charger's rating
plate.
- Never use the charger if the cable, plug or the device itself is damaged by external influences. Take
the charger to the nearest specialist workshop.
- Never open the charger. In the event of a fault, take it to a specialist workshop.
Safety information for Li-Ion batteries
- Do not open the battery. There is a risk of short circuit.
- Protect the battery from heat, including continuous exposure to sunlight, fire, water and moisture.
There is a risk of explosion.
- Vapours may escape if the battery is damaged or used improperly. Supply fresh air and consult a
doctor if you have any complaints. The vapours can irritate the respiratory tract.
- Liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of accidental
contact, rinse with water. If the liquid gets into your eyes, seek additional medical attention. Leaking
battery fluid may cause skin irritation or burns.
- Only use original batteries with the voltage specified on the rating plate of your power tool. If other
batteries are used, e.g. imitation, reconditioned batteries or batteries from other manufacturers,
there is a risk of injury and material damage due to exploding batteries.
- The battery voltage must match the battery charging voltage of the charger. Otherwise there is a
risk of fire and explosion.
- Only charge the batteries with chargers recommended by the manufacturer. Using a charger that is
suitable for a particular type of battery creates a fire hazard if it is used with other batteries.
- Sharp objects such as nails or screwdrivers or external force may damage the battery. An internal
short circuit may occur and the battery may burn, smoke, explode or overheat.
