Future EXPLORER MAGELLAN, User Manual

Page: 61 / 72

6 CHAIR ADJUSTMENTS
730 REV 09 DATE REV: 09/02/14 61 POWER CHAIR: EXPLORER MAGELLAN
 Tools required: 7/16” wrench or socket
C. Swing away Footrests width adjustments
The footrest brackets can be set to widths of 16 to 20
inches in one-inch increments for the small seat
frame and 20 to 24 inches for the large seat frame.
To adjust the bracket width, follow this procedure:
1.
Use the 1/2” wrench to remove the four 5/16”-18
bolts and split lock washers underneath the
legrest adapters at the front of the seat frame.
2. Slide the legrest adapters to the appropriate
width positions. The legrest adapters may be
moved in 1/2” increments, affecting the overall
width by 1”. Be sure to set the width
symmetrically about the center of the wheelchair.
3. When the overall width, measured from the
OUTSIDE of the vertical tubes, is at the desired
value, reinstall the four bolts and lock washers in
the appropriate holes under the back post
Figure 19 Upside Down View of Chair (front edge)