Future EXPLORER MAGELLAN, User Manual

Page: 59 / 72

6 CHAIR ADJUSTMENTS
730 REV 09 DATE REV: 09/02/14 59 POWER CHAIR: EXPLORER MAGELLAN
Front Riggings
A Footboard
The distance from the top of the footboard to the top
of the seat pan may be adjusted through a range
between 12 and 15 inches. Do this by removing the
bolts shown as “A” in Figure 17, repositioning the
footboard to the height required, and re-installing the
bolts. The distance between each hole on the vertical
footboard support tubes is 1/2". Tighten the bolts
sufficiently to provide the footboard with enough
friction for it to remain upright when flipped back for
transfers. To adjust the angle of the footboard, flip the
footboard up, and loosen the bolts on the bottom of
the footboard at each side. Slide the angle stops to
the desired position, and tighten the screws. Ensure
that both stop are adjusted equally, so each side
supports half the load.
 Tools required: 3/16” Allen hex key, 7/16”
wrench or socket, 5/32” Allen hex key
Figure 18