Future EXPLORER MAGELLAN, User Manual

Page: 62 / 72

6 CHAIR ADJUSTMENTS
730 REV 09 DATE REV: 09/02/14 62 POWER CHAIR: EXPLORER MAGELLAN
assembly, and tighten to 205 in lbs.

Tools required: 1/2" wrench, torque wrench
D. Swing away Footrests - Fore/Aft adjustments
The footrest brackets may also be adjusted front to
back over a 3-inch range in 1/2" increments. To
modify the setting of the footrest brackets perform the
following steps:
1. Use the 1/2" wrench to remove the four 5/16-18
bolts and split lock washers underneath the
footrest brackets at side of Explorer Magellan.
2. Slide the footrest brackets to the appropriate
fore/aft position. The footrest brackets may be
moved in 1/2" increments. Unless asymmetry is
required, be sure to set the brackets to the same
setting on each side of Explorer Magellan.
3. Reinstall the four bolts and lock washers in the
appropriate holes and tighten to 205 in lbs.

Tools required: 1/2" wrench, torque wrench
Figure 20 Upside down view of the front of the chair (front edge)