MANUAL
250.120RC – DISTY 120RC [EN]
V1.0 – 09.2022
6
Press the Measure / On button [3] a
second time to measure the first
wall
Length of wall
1
appears on
auxiliary display area [g
2
]
The Major display Area [h] and it’s
unit [i] shows the result of the area
calculation. (m
2
)
(height x wall
1
)
Press the Measure / On button [3] a
third time to measure the second
wall
Length of wall
2
appears on
auxiliary display area [g
1
]
The Major display Area [h] and it’s
unit [i] shows the updated result
of the area calculation. (m
2
)
(height x wall
1
)+(height x wall
2
)
You can repeat this last step and continue measuring additional walls for as long as
necessary. The height always remains visible in secondary display [g
3
], the previously
measured walls move up one place each time. After each additional wall measured, the
Major display area [h] will show the new, updated total area of all walls measured.
5.
Simple Pythagoras: Two legs (based on Hypothenuse and angle)
Only 1 measurement is needed. Pointing the distance meter along the axis of interest (c), the
angle (
α
) and length of c will be calculated.
Press the Measuring modes button [7] that number of times needed until the “Simple
Pythagoras” symbol appears on the measuring mode area [c] on the screen.
Press the Measure / ON button [3]
to measure the length of the
hypotenuse (c).
The angel (
α
) appears on auxiliary
display area [g
3
]
Length of Hypothenuse (c)
appears on auxiliary display area
[g
2
]
The length of the horizontal side
(a) appears on auxiliary display
area [g
1
]
The Major display Area [h] shows
the length of side (b).
