75
＜ Linkage menu ＞
Tap the values you
wish to adjust and
value input buttons
will appear on-screen.
Travel rate
Limit point
Next page
7-16 Ch
Left / Top
Right / Bottom
30 〜
140%
30 〜
140%
Indicates the current
direction of the stick, etc.
ŏ
Tap the [End point] button in the
Linkage menu to call the setup
screen shown below.
End point
Sets the travel, limit point.
(The display screen is an example. The screen depends on the model type.)
7KH(QGSRLQWIXQFWLRQDGMXVWVWKHOHIWDQGULJKW
VHUYRWKURZVJHQHUDWHVGLIIHUHQWLDOWKURZVDQG
ZLOOFRUUHFWLPSURSHUOLQNDJHVHWWLQJV
7KHWUDYHOUDWHQRUPDOIXOOVWLFNPRYHPHQWDW
KLJKUDWHVFDQEHYDULHGIURPWRLQ
HDFKGLUHFWLRQRQFKDQQHOVWR$OVRWKHOLPLW
SRLQW KRZ IDU WKH VHUYR WUDYHOV ZKHQ D PL[ LV
LQYROYHGZKHUHVHUYRWKURZVWRSVPD\EHYDULHG
IURPWR
Servo travel adjustment
1. Tap the travel button of the channel you
want to set. Value input buttons appear on
the screen.
2. Use these buttons to adjust the rate.
ŏ
Initial value: 100
ŏ
Adjustment range: 30
~140
3. Repeat the procedure above for each rate.
Limit point adjustment
1. Tap the limit button of the channel you want
to set.
2. Use the value input buttons to adjust the limit
point.
ŏ
Initial value: 135
ŏ
Adjustment range: 0
~155
3. Repeat this procedure for each limit point.
ŏ
Return to
Linkage menu
