62
<Functions of Linkage Menu>
S1
<Edit dial>
● Select the function name
and return to the Linkage
menu by pushing the RTN
button or pushing the
Home/Exit button.
THROTTLE CUT
Stops the engine safely and easily. (Airplane and helicopter only)
Throttle cut provides an easy way to stop the
engine, by flipping a switch with the throttle stick
at idle. The action is not functional at high throttle
to avoid accidental dead sticks. The switch’s
location and direction must be chosen, as it defaults
to NULL.
Throttle cut setting procedure
*Perform the following settings before using the edit dial to
move the cursor to the item to be set.
1. Activate the function:
Move the cursor to the [ACT/INH] item and
push the RTN button to switch to the data
input mode.
Turn the edit dial to the left until the blinking
changes from "INH" to "ACT" and then push
the RTN button.
2. Switch setting:
Move the cursor to the [SWITCH] item and
call the switch setup screen by Pushing the
RTN button and select the switch and ON
direction.
(For a detailed description of the setting method, see
[Switch Setting Method] at the back of this manual.)
3. Throttle cut position setting:
Move the cursor to the [CUT POSITION] item
and push the RTN button to switch to the
data input mode.
Adjust the servo operation position at throttle
cut operation by turning the edit dial to the
left or right.
Initial value: 17%
Adjustment range: 0%~50%
(When the RTN button is Pushed for 1 second, the servo
operation position is reset to the initial value.)
Push the RTN button to end adjustment and
return to the cursor move mode.
*With the selected cut switch ON and the throttle stick at idle;
adjust the rate until the engine consistently cuts off.
However, be sure that the throttle linkage is not pulled too
tight and unreasonable force is not applied to the servo.
● Select [THROTTLE CUT] at the linkage menu and call the
setup screen shown below by pushing the RTN button.
● Current throttle position
● Cut position
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
Summary of Contents for FMT-03
Page 1: ...1M23Z04404 For model...
