Before use
35
ŤŧŭŸŶŷŬűŪŃŷūŨŃůŨűŪŷūŃŲũŃŷūŨŃŦŲűŷŵŲůŃŶŷŬŦŮŶ
ŶŷŬŦŮŃůŨŹŨŵŃŷŨűŶŬŲűŃŤŧŭŸŶŷŰŨűŷŃ
} V*V
0
>+
>+ 0
0>
0,
] %V
tension. The tension
increases
when the adjusting screw is turned clockwise. When you are
,
3
W
You may change the length of the control sticks to make
your transmitter more comfortable to hold and operate. To
0
the stick tip by holding locking piece B and turning stick
>+ `
"#3
`
counterclockwise.
Stick tip A
Locking piece B
Mode 2 transmitter with rear case removed.
Aileron
Elevator
Rudder
Stick
Stick
Four screws are
removed and rear
case is removed.
+ screw is clockwise.
Stick tension maximum
Stick tension minimum
+ screw is counter-clockwise.
Do not loosen
the screw past
the top of the
frame, as this
will cause the
screw to rub on
the back case.
※
A screw touches a case.
