70
Common function
（Changing the mixing reference point）
（Including trim operation）
■ Mixing reference point setting
（1 second）
① Select the
"OFFST"
item and hold
the master side stick or knob in
the position you want to set and
set the new reference point by
pressing the
Jog key
.
Range：
-100 〜 +100%
（
THR only 0 〜 100%
）
Default：
0%
■ Trim ON/OFF setting
＋
−
or
① S e l e c t t h e
" T R M "
i t e m
and select ON or OFF by
pressing the
+ key
or
‒ key
.
Range：
OFF、ON
Default：
OFF
● When you do not want to include trim in
mixing select OFF.
At the end of setting, check that the mixing function is performed normally.
（P.MIX4 set up screen）
● Select the item with the
Jog key
.
5Point curve
setting
● The set curve is displayed on a
graph.
Function activation
Master CH select
Slave CH select
Switch selection
Switch ON direction
● When INH is selected, the
function cannot be used.
When ON or OFF is selected,
the function is activated. ON
and OFF changes are linked
to the switch.
Refer to the P.MIX1 〜 3 setting method described previously for settings other than the 5 point curve setting
described below.
■ 5point curve setting
＋
−
or
① Select the setting item (P-1 〜 P-5) of each point with the
Jog key
and set the amount of
movement of each point by pressing the
+ key
or
‒ key
.
Range：
-100 〜 +100%
Default：
0%
At the end of setting, check that the mixing function is performed normally.
P.MIX4
CAUTION
CAUTION
