52
Common function
① Select the
COPY
item and the select
the model number of the copy
destination by pressing the
+ key
or
‒ key
.
＋
−
or
Selection range：1 〜 30
② P r e s s t h e
Jog key
f o r 1
second.
（1 second）
● Confirmation message
"sure?"
blinks.
③ Copy the model by pressing the
Jog key
.
● A c o n f i r m a t i o n " b e e p "
sounds and
"COMPLETE"
is displayed on the screen
t o s h o w t h a t c o p y i n g i s
complete.
For safety, a double setting system is used. When a change is cancelled after the confirmation message is
displayed, the change is not made when moved to another setting item by Jog key.
① Select the
REST
item and then press the
Jog
key
for 1 second.
（1 second）
● Confirmation message
"sure?"
blinks.
② Date reset by pressing the
Jog key
.
● A c o n f i r m a t i o n " b e e p " s o u n d s a n d
"COMPLETE"
is displayed on the screen is
complete.
For safety, a double setting system is used. When a change is cancelled after the confirmation message
is displayed, the change is not made when moved to another setting item by Jog key.
Model copy
Date reset
Only the throttle channel (CH3) initial setting is REV (reverse). Thoroughly
check the Hi and Low directions of the engine or motor used and be careful that
they do not suddenly run at full speed.
Even after data reset, CH3 is reversed.
CAUTION
MDL SEL PAGE 2
● Original data : Model type
Model name
● Copy place : Model type Model
name
