27
2HR Functions
Changing the Neutral Position
Change the neutral position only when large forward stroke of the throttle stick is need
when using an FET E.S.C., etc.
(The neutral position is set to the center at the factory.)
*
However, when returning from the 2:1 to the 1:1 position (neutral center),
return the setting lever to the 1:1 side with the stick lever pushed to the HI
side. Other-wise, the setting lever cannot move.
2 : 1
1 : 1
Throttle
Stick
Setting Lever
1 : 1
2 : 1
①
Remove the four transmitter
r e a r c a s e s c r e w s a n d
remove the front case.
②
Move the setting lever at
the throttle stick body to the
outside.
③
Throttle stick setting lever is
changed.
④
Close the front case while
being careful that the stick
levers, trim levers, power
switch, LEDs, and battery
contacts do not get caught.
And tighten the four screws.
Summary of Contents for 2HR
Page 2: ...Instruction manual...
