FUTABA 2HR, Instruction Manual

Page: 28 / 30

29 Reference
Reference
Ratings
Communication method:
One-way operation system
Maximum operating range:
200m (Optimum condition)
For safety:
F/S (Throttle), ID (About 4 billion ways of pair
LGHQWL¿FDWLRQV
Transmitter T2HR
(FHSS system, Stick type, 2 channels)
Transmitting frequency:
2.4GHz band
Power requirement:
(Dry cell battery) Penlight x 4(6V)
Current drain:
100mA
Transmission antenna:
ȜGLSROH%XLOWLQ
Receiver R202GF:
(FHSS/S-FHSS system, 2 channels)
Power requirement:
4.8V
〜 7.4
V Rechargeable battery
Size:
23x35x9mm (excluding a projection part)
Weight:
6g
Servo S3003
(Standard servo)
Power requirement:
6V (common with receiver)
Current drain:
8mA (at 6V / Idle)
Output torque:
4.1kg-cm (57in.-oz.) at 6V
Operating speed:
0.19sec/60 degree at 6V
Size:
40.4x19.8x36mm (1.59x0.78x1.42in.)
Weight:
37.2g (1.31oz.)
E.S.C. MC231CR / MC331CR
(Electronic speed control)
Operating system:
Forward, reverse, and brake operations are all
linear.
Power requirement:
Ni-Cd/Ni-MH battery 6-7 cells (7.2 to 8.4V)
PWM frequency:
N+]¿[HG
Setting:
One-touch input by pushbutton switch. Set data is
saved to built-in EEPROM.
Current capacity (FET rating):
Forward=90A/200A, reverse=45A/100A
Size:
27.1x33.3x12.8mm (1.07x1.31x0.50in.)
(excluding protruding parts)
Silicon cord gauge size:
AWG16/AWG14 equivalent
Weight:
44/45g (1.55/1.59oz.)
(including connectors and switches)
BEC voltage:
6.0V
*Specifications and ratings are subject to change without prior notice.
NOTE: Futaba FHSS system, T2HR transmitter and R202GF receiver, does not work with cur-
rent Futaba FASST/FASSTest/T-FHSS system. Please use T2HR and R202GF in pairs. Futaba
FASST/FASSTest/T-FHSS system and FHSS system are not compatible each other.