3. Close loading door securely. Lock must
audibly lock.
Selecting the programme
Use the programme selector to set the pro-
gramme you require.
Selecting additional functions
You can choose from the additional functions
(only with time programmes ) :
button 1 -DELICAT (DELICATE)
button 2 -TEXTILE
DELICAT (DELICATE)
Pressing this button allows drying to be per-
formed at a lower temperature, for delicate
items. The corresponding pilot light comes
on. This option can also be used for time
controlled drying.
TEXTILE
Press the Textile button repeatedly, to select
the desired option. The relevant light will light
up. You can select 2 different options: CO-
TON (COTTON) cycle: to be used for cotton,
and SYNTHETIQUES (SYNTHETICS): to be
used for synthetic or delicate items.
3
1
2
5
6
4
Starting the programme
Press the DEPART/PAUSE (START/PAUSE)
button 3. The programme is started.
The programme phase is shown by appro-
priate lights; light 6 SECHAGE (DRYING) ,
light 5ANTIFROISSAGE/FIN (ANTICREASE/
END) .
Changing programme
To change a programme which has been se-
lected by mistake once the programme has
started, first turn the programme selector to
"O"
(OFF) position. The programme is can-
celled.
The programme can no longer be
changed directly once the programme
has started. If nevertheless there is an
attempt to change the programme on
the programme knob or if an function
button is pressed, led DEPART/PAUSE
(START/PAUSE) starts flashing tempo-
rarily in yellow. The drying programme is
not however affected by this (laundry
protection).
Drying cycle complete / removing
laundry
Once the drying cycle is complete, the lights
ANTIFROISSAGE/FIN (ANTICREASE/END)
and FILTRE (FILTER) (light4) are on. If the
buzzer function is active, an acoustic signal
will sounds intermittently for about one mi-
nute.
The drying cycles are automatically fol-
lowed by an anti-crease phase which
lasts around 30 minutes. The drum ro-
tates at intervals during this phase. This
keeps the laundry loose and free of crea-
ses. The laundry can be removed at any
time during the anti-crease phase. (The
laundry should be taken out towards the
end of the anti-crease phase at the latest
to prevent creases from forming.)
1. Open door.
2. Remove laundry.
3. Remove filter after clothes has been re-
moved. Clean the filter.
Warning!
Before You place the filter,
please check it there is nothing inside the
filter seat.
4. Turn the programme selector to "O"
(OFF).
8
