What to do if ...
Problem
Possible cause
Remedy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Loading door is open.
Close loading door.
Have you pressed the DEPART/
PAUSE (START/PAUSE) but-
ton?
Press the DEPART/PAUSE
(START/PAUSE) button again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme
the next time you dry (see “Pro-
gramme chart” chapter).
Fluff filter clogged.
Clean fluff filter.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots covered up.
Uncover ventilation slots.
Residue on inside surface of
drum or drum ribs.
Clean inside surface of drum
and drum ribs.
Conductance of water at instal-
lation site differs from standard
setting of machine.
1)
Re-programme standard setting
for degree of drying (see ‘Ma-
chine settings’ chapter)
1)
.
Loading door does not close.
Filter not in place
2)
.
Install filter into place
2)
.
Drying cycle ends shortly after
programme starts.
Not enough washing loaded or
washing loaded is too dry for se-
lected programme.
Select time programme or high-
er drying level (e.g. TRES SEC
(EXTRA DRY) instead of PRET A
RANGER (CUPBOARD DRY) ).
Drying cycle lasts an unusually
long time. Note: After around 5
hours the drying cycle ends au-
tomatically.
Filter clogged.
Clean filter.
Load volume too big.
Reduce load volume.
Laundry insufficiently spun.
Laundry must be adequately
spun.
1) Only dryers with conductance programming
2) Only dryers with removable filter
Machine settings
BUZZER permanent off
1. Turn the programme selector to any pro-
gramme.
2. Press simultaneously the
DELICAT
(DELICATE)
and
TEXTILE
buttons and
hold down for approx. 5 seconds.
3. The buzzer is by default always off.
Technical data
Height x width x depth
85 x 60 x 58 cm
Drum volume
108 l
Depth with loading door open
109 cm
10
