5. Close the lid of the detergent dispens-
er. Press the lid until it locks into posi-
tion.
Different brands of detergent dissolve
in different times. Some detergent tab-
lets do not have the best cleaning re-
sults during short washing pro-
grammes. Use long washing pro-
grammes when you use detergent tab-
lets to fully remove the detergent.
MULTITAB FUNCTION
The multitab function is for combi detergent
tablets.
These tablets contain agents such as deter-
gent, rinse aid and dishwasher salt. Some
types of tablets can contain other agents.
Do a check if these tablets are applicable
for the local water hardness. Refer to the in-
structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function stops automatically
the flow of rinse aid and salt. The rinse aid
indicator light and salt indicator light are de-
activated.
The programme duration can increase if
you use the multitab function.
Activate or deactivate the multitab
function before the start of a washing
programme.
You cannot activate or deactivate the
multitab function when the programme
operates. Cancel the washing pro-
gramme, then set the programme
again.
To activate the multitab function:
• Press the multitab button. The multitab
indicator light comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab
indicator light goes off.
Do these steps if the drying results
are not satisfactory:
1. Fill the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
• You can only activate or deactivate
the rinse aid dispenser when the
multitab function is activated.
To activate/deactivate the rinse aid dis-
penser:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons B and
C.
– The indicator lights for function but-
tons A, B, and C start to flash.
4. Release function buttons B and C.
5. Press function button B.
– The indicator lights for function but-
tons A and C go off.
– The indicator light for function button
B continues to flash.
– The digital display shows the setting.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
6. Press function button B again.
– The digital display shows the new
setting.
7. Switch off the appliance to save the op-
eration.
37
