• the set level of the water softener.
• The number of the washing programme.
• Remaining time to the end of the pro-
gramme.
• Activation/deactivation of the rinse aid
dispenser (only with multitab function on).
• End of the washing programme. The dis-
play shows a zero.
• Number of hours in delay start.
• Fault codes.
• Activation/deactivation of the audible sig-
nals.
Function buttons
Use the function buttons for these opera-
tions:
• To set the water softener. Refer to the
chapter 'Setting the water softener'.
• To deactivate/activate the rinse aid dis-
penser, when multitab function is active.
Refer to the chapter 'Multitab function'.
• To cancel the washing programme or the
delay start in progress.
• To deactivate/activate the audible sig-
nals.
Setting mode
The appliance must be in setting mode
for these operations:
• To set a washing programme.
• To set the water softener level.
• To deactivate/activate the rinse aid dis-
penser.
• To deactivate/activate the audible sig-
nals.
Press the on/off button. The appliance
is in setting mode when:
– The programme button indicator light
comes on,
– the digital display shows 2 horizontal
bars.
Press the on/off button. The appliance
is not in setting mode when:
– The programme button indicator light
comes on,
– the digital display shows the time dura-
tion of a washing programme.
– A washing programme is set. It is neces-
sary to cancel the programme to go back
to the setting mode. Refer to the chapter
'Setting and starting a washing pro-
gramme'.
Audible signals
You can hear an audible signal:
• At the end of the washing programme.
• During the setting of the level of the water
softener.
• When the appliance has a malfunction.
The activation of the audible signals is set at
the factory.
Do these steps to deactivate the audible
signals:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons B and
C until the indicator lights of function
buttons A, B and C start to flash.
4. Release function buttons A and B.
5. Press the function button C.
– Indicator lights for function buttons A
and B go off.
– Indicator light for function button C
flashes.
– The digital display shows the setting.
Audible signals deacti-
vated
Audible signals activa-
ted
The audible signals are activated.
6. Press the function button C again.
– The digital display shows the new
setting.
The audible signals are deactivated.
7. Switch off the appliance to save the op-
eration.
Do these steps to activate the audible sig-
nals:
1. Do the above procedure until the digital
display shows necessary setting.
USE OF THE APPLIANCE
Refer to the following instructions for each
step of procedure:
1. Make a check if the water softener level
is correct for the water hardness in your
29
