The cleaning results are not satisfactory
There are streaks, milky
spots or a bluish coating on
glasses and dishes
• Decrease the rinse aid dosage.
Dry water drop signs on
glasses and dishes
• Increase rinse aid dosage.
• The detergent can be the cause.
TECHNICAL DATA
Dimensions
Width
546 mm
Height
759 mm
Depth
571 mm
Electrical connection - Voltage -
Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher door.
Water supply pressure
Minimum
0,5 bar (0,05 MPa)
Maximum
8 bar (0,8 MPa)
Capacity
Place settings
11
INSTALLATION
Warning!
Make sure that mains plug is
disconnected from the mains socket
during installation.
Install the appliance under a counter (kitch-
en worktop or sink).
If a repair is necessary, the appliance must
be easily accessible for the engineer.
Put the appliance adjacent to a water tap
and a drain.
For the venting of the dishwasher only wa-
ter fill, water drain and power supply cable
openings are necessary.
Make sure that the water inlet hose, the
drain hose and the supply cable are not
kinked or squashed, when you insert the
machine.
Attaching the appliance to the adjacent
units
Make sure that the counter below which
you attach the appliance is attached to a
safe structure (adjacent kitchen units, cabi-
nets, wall).
1. Set the appliance in front of the kitchen
unit. Put the mains cable and the hoses
into the recess unit.
2. Push the appliance in and pull the
mains cable and the hoses through.
Make sure that they are not kinked or
squashed.
3. Align the appliance and attach it on the
two sides in the upper area of the tub.
Other attaching possibilities
1. On the plinth.
105
50
44
