Premiere Movie Server Installation Manual
6
Chapter 1
Before you get started... the basics
CONNECTING TO A RECEIVER
(w/out HDMI INPUTS)
:
Connect the HDMI cable directly from the movie server to your television
for video. Connect an optical cable
(digital toslink)
directly from the
movie server to your receiver for audio.
Note which input you’ve plugged the optical cable into on the receiver so
you can select the appropriate input on the front of the receiver.
Using the same Audio Wizard we spoke of earlier, you must set the audio to
“Optical Digital Output”.
CONNECTING USING COMPONENT VIDEO CABLES:
Currently, CV cables are typically only used for component distribution or
for older displays or projectors that only support component video. To
connect a movie server to a display with component video, requires an ap-
proved HDMI to component adapter.
You can purchase one of these by calling Fusion Research at 925-217-1233
and asking for an FR-COM, if you require a composite or S-Video input,
please let us know, we also have an adapter for these as well.
HDMI cable
Optical cable
