Premiere Movie Server Installation Manual
25
Chapter 4
Navigating your Fusion System
The movie detail screen gives you a lot of information about the selected
movie including: Movie or TV rating, release date, length of movie, aspect
ratio, genres the movie is classified, director, actors and a brief synopsis of
the movie.
There are four commands available to you on most movies:
1.
Play Disc
-
starts just as a DVD or Blu-ray player would. You will see any
previews, disc announcements, etc before going to the main disc menu.
2.
Play Movie
-
starts the at the beginning of the movie.
3.
Resume
-
if the movie has been stopped in the past, this will allow you to
resume the movie on that exact same spot.
4.
Advanced
(If enabled from the set up menu)
-
allows you to either update
the movie metadata or delete the movie entirely from the system.
If you are simply looking for a movie to watch, that’s all you need do, move
to the movie, select it and click [Play Movie]. Your movie will start up
within 3 seconds.
THE SIDEBAR:
When you select the movie detail screen you are locked on that one movie.
If you’d like to get a little more information about the movies as you scroll
through you can elect to enable the side bar.
The sidebar gives you most of the information that you see on the movie
detail screen with the exception that it changes as you scroll through the
movies. This is ideal if you’re not sure what you want to watch but want
more information as you peruse.
(
Note:
You will not be able to start a
movie from the sidebar, you will still need to click [OK] to bring up the
movie.)
