30
10) For reducing from the wind-induced movement, fasten the spring clamp above the base flange and
tighten bottom nut by hand.
* Do not damage the radome gasket when fasten the spring clamps.
* Use the spring clamp properly as examples shown below.
Bad examples:
Figure 4.20: Space between
spring clamp
and radome base
flange
Figure 4.19:
Spring
clamp
is inclined
Figure 4.18:
Fasten spring
clamp
only partially
Figure 4.17: Fasten properly by
spring clamp
Approx. 330mm
Figure 4.21
:
Completion of opening upper radome
Summary of Contents for WR110
