Furuno WR110, Installation Manual

Page: 24 / 71

18
Case 3: The radar stand is higher than 2m.
The ladders are placed inside the rack for safety during lifting.
In order to climb the scaffold from the inside of the radar stand, it has to make a structure with a gap
at least one place where the service engineer can go through. However, do not set it on the cable
introduction side of ATU. (Because there is a cable protection tube)
The scaffold may not need to fold if there is no risk to hit the people. In addition, when the storage
type is eliminated, the scaffold may be expanded. (However, consider that birds may form a nest if
scaffold is unfoldable)
ATU
Ladder
Scaffold
Figure 4.5: Whole image