Furuno RP-180, Operator'S Manual

Page: 53 / 100

8. MEMORY CARD OPERATIONS
8-4
6. Assign a file name as below. A file name may contain 32 alphanumeric characters. For
example, assign the file name FURUNO1.
(a) Choose the character “F” with the trackball.
(b) Press the [ENTER/SELECT] key. (You can change a wrong character by choosing it with the
trackball and the entering correct character. You may cancel an entire line of data with the
[CANCEL/CLEAR] key.)
(c) Choose the character “U” with the trackball and press the [ENTER/SELECT] key.
(d) Enter the remaining characters.
(e) Choose OK.
7. Press the [ENTER/SELECT] key. “Recording” appears while data is being recorded.
8. Press the [MENU] key to finish.
Write protect tab
The write protect tab on a memory card prevents writing over information stored on the card.
Slide the tab rightward to write protect a memory card.
Slide tab right to
write protect.
Write protect tab on memory card