Furuno RP-180, Operator'S Manual

Page: 43 / 100

6. NAVIGATION
6-4
6.2 Cancelling Navigation
Once you arrive at your ultimate destination you probably won’t need the destination
waypoint. You can cancel it as follows:
1. Press [MENU], [1], [1], [6], [6] to display the Destination menu.
2. Press the [2] key to choose Cancel.
3. Press the [ENTER/SELECT] key followed by the [MENU] key.
Note:
MOB destination can also be cancelled by placing the cursor on the MOB mark and
pressing the [CANCEL/CLEAR] key. This can only be done when the MOB is not set
as destination.
6.3 Skipping Route Waypoints
A route waypoint may be deselected temporarily from the route list. Using the following
figure as an example, you would want to temporarily deselect route waypoints 04, since
your ship is to change course at waypoint 05 and head to waypoint 03.
Route points cannot be skipped while following a route.
Port
Port
Waypoint 04
Waypoint 05
Waypoint 03
New courseline
Waypoint 02
Waypoint 01
Waypoint 06
Sample route in which waypoints are skipped
1. Press [MENU], [1], [1], [5], [5] to display the Route menu.
2. Press the [1] key to choose List and then press the [ENTER/SELECT] key.
3. Use the trackball to choose route number.
4. Press the [ENTER/SELECT key.