Furuno RP-180, Operator'S Manual

Page: 73 / 100

AIS
10-10
10.8.2 Choosing history display attributes
You may choose history point color, the number of history points to show per history plot
interval and the history plot interval as below. Note that the color of the history points is the
same as the symbol color.
1. Press the [F2] key to open the AIS(1) menu.
2. Press the [0] key twice to show the AIS(2) menu.
3. Press the [3] key (History Points).
4. Further press the [3] key to choose number of history points to display per plotting
interval: 5 or 10.
5. Press the [ENTER/SELECT] key.
6. Press the [4] key (History Interval).
7. Press the [4] key again to choose history interval desired among 10, 30 s; 1, 2, 3 and 6
min.
8. Press the [ENTER/SELECT] key.
9. Press the [MENU] key to close the menu.
10.9 AIS Symbol Color
You may choose the color for the AIS symbols among red*, yellow*, green*, cyan, magenta,
blue and white*. (* = Not available on IMO-type radar.)
1. Press the [F2] key to open the AIS(1) menu.
2. Press the [0] key twice to show the AIS(2) menu.
3. Press the [5] key (Symbol Color).
4. Further press the [5] key to choose color desired.
5. Press the [ENTER/SELECT] key.
6. Press the [MENU] key to close the menu.