Furuno GP-1670, Operator'S Manual

Page: 98 / 142

10. CUSTOMIZING YOUR UNIT
10-4
from the GPS satellite. The raw velocity data may change randomly depending on re-
ceiving conditions and other factors. You can reduce this random variation by increas-
ing the filter setting. Like with the latitude and longitude filter, the higher the speed filter
setting the more smoothed the raw data. If the setting is too high, however, the re-
sponse to speed and course change slows. For no smoothing, choose Off.
[FIX DATUM]: Select the datum used to prepare your chart.
[NAVIGATION SETUP] : Navigate provides for customizing of the map display.
[COORDINATE SYSTEM]: Select the coordinate display method, among ddd
mm.mmm, ddd mm.mmmm, or dddmm ss.
[ROTATION OF THRESHOLD]: Sets the amount of course (in degrees) that initiates
redrawing of the course in the Auto course-up mode.
[COMPASS SETUP] : Select the type of compass used and set magnetic variation.
[BEARINGS]: Select True for gyrocompass, Magnetic for magnetic compass.
[VARIATION]: The location of the magnetic north pole is different from the geograph-
ical north pole. This causes a difference between the true and magnetic north location.
This difference is called magnetic variation, and varies with respect to the observation
point on earth. Your unit is preprogrammed with all the earth's magnetic variations.
However, you may wish to enter variation manually, referring to a nautical chart, to re-
fine accuracy. Set to [AUTO] to get correct variation when there is no position data.
[INTERNAL GPS SETUP] : Set up the internal GPS receiver.
[RESTART GPS]: Restart reception of GPS satellites.
[NAVIGATION SPEED]: Set different dynamic platform models to adjust the naviga-
tion engine to the expected application environment. [Low] corresponds to pedestrian
dynamic platform model. For applications with low acceleration and speed. [High] cor-
responds to at sea dynamic platform model. Recommended for applications at sea.
INTERNAL GPS SETUP