Furuno GP-1670, Operator'S Manual

Page: 60 / 142

4. ROUTES
4-10
[Connect] : Connect a route to the last point of the route selected for editing. See
section 4.10.
[Coord Type] : Select the position display format for points globally, among
ddd’mm’ss, ddd°mm.mmm, ddd°mm.mmmm, ddd.dddddd.
4.8 Route Report, Route Calculator
A route report provides detailed information about a route plus a route navigation cal-
culator. The route navigation calculator lets you see the time necessary to travel to
each leg and the amount of fuel required for each leg with various speeds and fuel
consumption figures.
Route report
To show the route report, select a route on the [Routes List] then press the ENT key.
Select [REPORT] from the context-sensitive menu then press the ENT key. The report
provides the following information:
• The name of each point
• The position of each point
• The bearing to each point
• The distance to each point
• The total distance between points and total distance of the route
• The time required to get to a point using the speed selected
• The amount of fuel required to get to a point and the total amount of fuel required to
run the route.
Note: A route report can also be shown by selecting the route on the screen. Select
the route then press the [ENT] key. Select [INFO] from the context-sensitive menu.
Route calculator
Use the [Speed] and [Fuel] buttons at the bottom of the [Route Report] to enter speed
and fuel consumption/hour. See how those values affect the [Time] and [Fuel] indica-
tions.