Furuno GP-1670, Operator'S Manual

Page: 81 / 142

8-1
8. MEMORY CARD OPERATIONS
This system uses SD and SDHC cards to store points, routes, tracks, settings, and
screenshots. The system accepts cards of up to 32GB in size.
8.1 The Memory Card Screen
Open the [GENERAL] menu and select [MEMORY CARD] to show the [MEMORY
CARD] screen. This is where all phases of memory card operations start.
8.2 How to Initialize SD Cards
Before you can use an SD card, the card must be initialized for use with the system.
You can initialize cards that contain data, in which case all information on the card is
erased.
1. Open the SD card cover and insert a blank SD card in the SD card slot. Close the
cover.
2. Open the [GENERAL] menu and select [MEMORY CARD].
3. Push the
ENT key to give control to the RotoKey functions (at the bottom of the
screen.) RotoKey
TM
. Rotate the RotoKey
TM
to select [Initialize] then push the
key. (If the card is not a storage card the message "It is not a user card." appears.)
When the initialization is completed, the message "SD Card was successfully ini-
tialized." appears. Do not remove the card until the initialization is completed.
4. Press the ESC/MENU key to erase the message.
Points&Routes
Tracks Screenshots Defaults
Name Points Routes Date Time
FILE0001 7 2 04-02-12 01:20PM