Furuno GP-1670, Operator'S Manual

Page: 97 / 142

10. CUSTOMIZING YOUR UNIT
10-3
10.3 SYSTEM Menu
[LANGUAGE] : Select the language to use, among English and major European and
Asian languages.
[UNITS OF MEASURE] : The default units of measure are based on the language se-
lected. However, you can freely set the units of measure for distance, speed, wind
speed, depth, temperature, air pressure, oil pressure and fuel.
[FIX] : Provides for adjustment of the GPS position.
[POSITION FILTER]: When the DOP or receiving condition is unfavorable, the GPS
fix may change, even if the vessel is dead in water. This change can be reduced by
smoothing the raw GPS fixes. You can choose the setting from among [Off], [Low],
[Medium] and [High]. The higher the setting, the more smoothed the raw data, howev-
er too high a setting slows response time to change in latitude and longitude. This is
especially noticeable at high ship's speeds. [Off] is the “normal” setting; increase the
setting if the GPS fix changes greatly.
[SPEED FILTER]: During position fixing, ship's velocity (speed) is directly measured
Item Available units
Distance
Speed
Wind Speed
Depth
Temperature
Air Pressure
Oil Pressure
Fuel NM, SM, KM, NM+FT, NM+MT, SM+FT
kn, mph, km/h
kn, m/s, mph, BFT
m, ft, fm, pb, HR
°C, °F
Bar, hPa
Bar, PSI, kPa
l, g
FIX DATUM WGS 1984