Furuno FSV-35S, Operator'S Manual

Page: 93 / 144

5. HOW TO CUSTOMIZE THE EQUIPMENT
5-5
5.3 USER PROG Control
The USER PROG control provides for instant setup of the equipment according to
fishing ground or target fish. Ten programs may be set up, and vertical and horizontal
display settings may be programmed together or individually. (The default settings
programs them together. For how to program them individually see section 5.3.2.)
5.3.1 How to select a user program
Rotate the USER PROG control clockwise or counterclockwise to select the program
no. desired. The program no. selected appears at the top right-hand corner of the
screen to the right of “P”. If the equipment is turned off with a user program active, it
starts up with those settings at the next power on.
Note: The user program no. can also be adjusted from the user program no. indica-
tion. Put the cursor on the user program no. indication to highlight it in yellow then roll
the scrollwheel.
5.3.2 How to program the USER PROG control
1. Set the display appropriately.
When a combination mode is shown, press H/V/S key to select the display to pro-
gram.
2. Press the MENU/ESC key to show the main menu.
3. Select [Others] then push the left-click button.
4. Select [Register] then push the left-click button.
*: H/V Interlock: Effective on both H and V displays.
H/V Individual: Select the display to use with the H/V/S key.
5. Do one of the following then push the left-click button.
• For H/V Interlock: Select [Assign User Prog].
• For H/V Individual: Select Assign [User Prog-H/S] or [Assign User Prog-V].
[Sel User Prog] = [H/V Individual] [Sel User Prog] = [H/V Interlock]