Furuno FSV-35S, Operator'S Manual

Page: 24 / 144

1. OPERATIONAL OVERVIEW
1-12
6. Select the setting.
• (Numeric) Select S to increase the value then push the left-click button (or roll
the scrollwheel upward). To decrease the value, select T and push the left-click
button (or roll the cursor scrollwheel downward).
• (Items) Select an item then push the left-click button.
7. Select [Quit] on the setting box then push the left-click button to close the box. If
you want to cancel the setting, select [Cancel].
8. Long-press the MENU/ESC key to close all menus.
You can also close all menus by selecting [Quit] on the active menu and long-
pushing the left-click button.
You can relocate menu windows. Use the trackball to put the arrow cursor on the
menu title (blue when menu is active), push the left-click button, drag the window to
new location then release the left-click button. The position of the menu windows is
saved.
Note 1: In the default setting, the sub menu item [Initial Setting] in the [Others] menu
and some items in the [Initialization] menu are shown in red. This means these items
are locked to prevent accidental change of setting. When you open one of these sub
menus and select an item, the confirmation message shown below appears. To
change the setting of the selected item, select [Changeable] and push the left-click
button to show the dialog box for the item. To escape, select [Cancel] then push the
left-click button.
If you do not want to show the confirmation message above, see page 6-16.
Note 2: If two menu items are functionally related, the setting of one menu item may
cause restriction to another menu item. In this case, the equipment ignores both set-
tings to use different ones or invalidates the setting of the item encountering restric-
tion. The invalid setting value or menu item is shown in gray.
Pop-up menu operation
Push the right-click button on the numeric/graphic data display to show the pop-up
menu. These items can be accessed from the main menu.