Furuno FSV-35S, Operator'S Manual

Page: 35 / 144

2. HORIZONTAL MODE
2-11
4. Select [TVG Distance] then push the left-click button.
5. Select [Changeable] then push the left-click button.
6. Select [Near], [Meddle] or [Far] as appropriate then push the left-click button to
change the setting.
Near: Setting range, 50 to 150 m, 10 m increments. Med: Setting range, 300 to
500 m, 20 m increments Far: Setting range, 600 to 1000 m, 40 m increments
7. Select [Quit] on the setting box then push the left-click button.
Adjust the TVG level for selected TVG distance as follows.
8. Select [TVG-Near], [TVG-Med] or [TVG-Far] as appropriate then push the left-
click button.
9. Select S or T as appropriate then push the left-click button to change the setting.
The setting range is -5 to 5. The higher the setting, the higher the gain. For strong
echoes such as sea surface reflections or plankton layer lower the setting by 1 or
2.
10. Select [Quit] on the setting box then push the left-click button.
11. Long-press the
MENU/ESC key to close all menus.
Note: When a school of fish is located on a long-range setting (about 800 meters)
and is approaching own ship, do as follows:
1) Adjust the tilt to keep the school of fish in the center of the sonar beam, name-
ly, the school of fish is displayed in strongest colors possible.
2) Confirm that the fish echo is displayed in the same color as it approaches.
3) If the color suddenly changes to weaker colors as the fish enters MEDIUM and
NEAR areas, the TVG is improperly set. Adjust the TVG.
4) If this setting produces sea surface reflections and noise, try to remove them
with the AGC (section 2.7.1) and noise limiter (section 2.9.5).
Current settings
Select item with trackball;
push left-click button to adjust.