Furuno FMD-3200, Installation Manual

Page: 69 / 142

3. ECN-303/304 (OPTION)
3-7
4. Press the stoppers with your fingers to unlock them to release the rack, then push
the rack into the console.
5. Fasten two hex. bolts (M6, removed at step 2 in section 3.2.) to fix the rack to the
console.
6. Fasten the cables from the processor unit with four clamps at the front of the rack.
7. Use the clamp (see step 1 in section 3.2) to refasten the power cable.
Note: Confirm that the dummy plate covers the power switch.
8. Fix the front cover to the console with two screws.
Location of four clamps
(behind
the chassis)
(behind
the chassis)
Keep the
dummy
plate in this
position.