Furuno FELCOM250, Installation Manual

Page: 44 / 69

3. SETTING AFTER INSTALLATION
3-10
4. Click the [Add extension] button.
The following window appears. The lowest unregistered number between 1000
and 9999 appears in the [Number] box. To use this number, go to step 6. To reg-
ister a different number, go to step 5.
5. Key in a new extension number in the [Number] box (1000-9999).
You cannot use a number that is already entered. If you enter the same number,
an error message will appear at the registration.
6. Key in a password in the [Password] box (a maximum of eight alphanumeric char-
acters).
Upper case alphabet can be used.
Note: Do not forget to write down the telephone number and password.
7. If necessary, enter a comment in the [Note] box (a maximum of 50 characters), for
example, user name, setting location, etc.
8. Enter the outside line settings in the [Voice ring] box. (Refer to section 3.3.)
9. Enter the fax settings in the [Fax ring] box.
10. Set the transmission limit in the [Call limit] box.
• No limit: No transmission limit.
• Extension only: Transmission available for extension call only.
• Incoming only: Outgoing call not available. Incoming call only.
• Outside only: Transmission available for external call only.
11. If necessary, check [Required] in the [Access code] box to require input of access
code to access an outside line. (Refer to section 3.3.)
12. In the [Call filter for outside call] box, set the restrictions for outside calling. (Refer
to section 3.3.)
13. Click the [Add] button.
The message "Completed" will appear.
14. Click the [OK] button.
The registered number appears on the Extension screen.
15. To register multiple telephones, repeat steps 4 to 14.