Furuno FELCOM250, Installation Manual

Page: 23 / 69

1. HOW TO INSTALL THE UNIT
1-17
How to change modem settings
1. Press [Menu], [*], [2], [8], [6] and [4] keys in this sequence to enter the mainte-
nance mode.
The fax machine beeps for approximately one second and displays "MAINTE-
NANCE" on the LCD. This means the FAX is in the initial stage of the maintenance
mode.
2. Press [1] and [0] keys in this order. "WSW00" is displayed on the LCD.
3. Press [1] and [3] keys in this order. "WSW13=00011011" appears on the LCD.
4. Press [0], [0], [0], [1], [1], [0], [1], [0] and [OK] keys in this order. "WSW00" appears
on the LCD.
5. Press [1] and [9] keys in this order. "WSW19=11100000" appears on the LCD.
6. Press [1], [1], [1], [0], [0], [0], [1], [0] and [OK] keys in this order. "WSW00" appears
on the LCD.
7. Press [Stop/Exit] key to return the machine to the initial stage of the maintenance
mode.
8. Press [9] key twice to exit from the maintenance mode and return to standby.
"Please Wait." appears then return the normal display.
1.7 Telephone FC755D1 (Option)
General
The telephone can be installed on a desktop or a bulkhead. Select a location where
the telephone can easily be operated.
• For installation on a wooden table, use the mounting base and self-tapping screws
(supplied).
• For installation on a steel table, fix the telephone with nuts and bolts.
• For bulkhead mounting, use the bulkhead mounting base (supplied with telephone
accessories).
Mounting location
Select a location where temperature and humidity are moderate and stable. Secure
sufficient space around the unit for ease of operation and maintenance.
How to mount
The mounting dimensions are shown in the outline drawing at the back of this manual.
Determine the mounting location, leaving sufficient space around the unit, and then fix
the mounting base to the mounting location. The mounting base is different for bulk-
head and desktop mounts, however the mounting procedure is the same for all.
1. Set the mounting base to the mounting location with four self-tapping screws
(4x16).
2. On the bottom of the telephone, release the screw shown in the figure. (The screw
may be discarded.) Attach the vulcanizing tape (supplied) to the handset fixture.