Furuno FCV-30 Operator'S Manual Download

Page: 4 / 110

SAFETY INSTRUCTIONS

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel
should work inside the
equipment.

Immediately turn off the power at the
switchboard if water leaks into the
equipment or something is dropped in
the equipment.

Continued use of the equipment can cause
fire or electrical shock. Contact a FURUNO
agent for service.

Do not disassemble or modify the
equipment.

Fire, electrical shock or serious injury can
result.

Do not place liquid-filled containers on
the top of the equipment.

Fire or electrical shock can result if a liquid
spills into the equipment.

Immediately turn off the power at the
switchboard if the equipment is emitting
smoke or fire.

Continued use of the equipment can cause
fire or electrical shock. Contact a FURUNO
agent for service.

Make sure no rain or water splash leaks
into the equipment.

Fire or electrical shock can result if water
leaks in the equipment.

WARNING

Keep heater away from equipment.

A heater can melt the equipment's power
cord, which can cause fire or electrical
shock.

Use the proper fuse.

Fuse rating is shown on the equipment.
Use of a wrong fuse can result in damage
to the equipment.

Do not operate the equipment with wet
hands.

Electrical shock can result.

Warning Labels

Warning labels are attached to the equip-
ment. Do not remove the labels. If a
label is missing or damaged, contact
a FURUNO agent or dealer about replace-
ment.

Name: Warning Label (1)
Type: 86-003-1011-1
Code No.: 100-236-231
Location: Processor Unit,
Junction Box

WARNING

To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.

goes off and then remove cover.

Turn off power before servicing.

No user-serviceable parts inside.

And wait until charge lamp (green)

Do not remove cover.

Electrical shock hazard.

DANGER

Name: Danger Label
Type: 10-079-6144
Code No.: 100-310-880
Location: Transceiver
Unit

Summary of Contents for FCV-30















































































































Search results

Summary of Contents for FCV-30

Reviews:

Related manuals for FCV-30

Brands by name

Popular brands

Furuno FCV-30, Operator'S Manual

Search results

Summary of Contents for FCV-30

Reviews:

Related manuals for FCV-30

Brands by name

Popular brands