Furuno FCV-30 Operator'S Manual Download

Page: 12 / 110

1. OPERATIONAL OVERVIEW

1-2

1.2 Menu

Operation

The FCV-30 is controlled from a menu system. Two types of menus are available:

Main menu:

All menu options are contained in pull-down menus.

Pop-up menu: Contains most frequently used menu functions.

1.2.1

How to use the main menu

Menu bar

Title bar

Close button

Trackball pointer

File Disp Setting System Window Marker line Monday, April 10, 2006 15:01

Date and time

Menu bar

1. Roll the trackball to choose menu desired (File, Disp, Setting, System, etc.) from the

menu bar at the top of the screen and the click it with the left button.

Ellipsis indicates a
dialog box is available

Setting menu

2. Roll the trackball to choose menu item desired and then click with the left button. A

menu item which contains an ellipsis (…) indicates a dialog box is available.

Tenkey
button

Multi beam dialog box

Summary of Contents for FCV-30















































































































Search results

Summary of Contents for FCV-30

Reviews:

Related manuals for FCV-30

Brands by name

Popular brands

Furuno FCV-30, Operator'S Manual

Search results

Summary of Contents for FCV-30

Reviews:

Related manuals for FCV-30

Brands by name

Popular brands