Furuno FCV-30 Operator'S Manual Download

Page: 33 / 110

1. OPERATIONAL OVERVIEW

1-23

1.13 Suppressing Low Level Noise

(Clutter suppression)

Light-blue dots may appear over most of screen. This is mainly due to dirty water or noise.
This noise can be suppressed by adjusting the Clutter suppression function.

Appearance of clutter on the display

1. Click Settings.
2. Click Echo image.
3. Click

▼

in the Clutter curve box.

Clutter curve options

4. Click the setting desired, referring to the description below.

Standard:

With “high” clutter level setting, strong colors are untouched while weak echo

colors are suppressed.

Straight:

With “high” clutter level setting, weak-to-strong echoes are suppressed by

averaging.

OFF:

Clutter suppression function is disabled.

5. Click

▼

in the Clutter box.

Clutter options

6. Click the setting desired.
7. Click the OK button.

Summary of Contents for FCV-30















































































































Search results

Summary of Contents for FCV-30

Reviews:

Related manuals for FCV-30

Brands by name

Popular brands

Furuno FCV-30, Operator'S Manual

Search results

Summary of Contents for FCV-30

Reviews:

Related manuals for FCV-30

Brands by name

Popular brands