1. OPERATION
16
1.18
Waypoints
Waypoints are used to:
• Record the position of an important echo as
a waypoint, and 20 points can be saved.
• Output a waypoint position to a chart plotter
to mark position on its screen.
• Find range, bearing and time-to-go to a lo-
cation (waypoint).
This feature requires position data, fed from a
GPS navigator.
1.18.1
Entering a waypoint
There are two ways to enter a waypoint: di-
rectly enter it from the screen, or manually en-
ter its latitude and longitude coordinates from
the menu.
Entering a waypoint from the screen
1. Press the [MARK] key. The cursor ap-
pears along with waypoint entry instruc-
tions. To enter a waypoint at current
position, go to step 3.
Note:
If there is no position data, the mes-
sage "No position data" appears.
2. Use the Cursor pad to set the cursor
where desired. Picture does not advance
until step 3 is completed, and the instruc-
tion window is integrated into the data
box.
You can choose the echo to show on the
A-scope display with the cursor. This is
useful for finding the intensity of a specific
echo.
3. Press the [MARK] or the [ENTER] key to
save the position. A red vertical line ap-
pears at the position. The waypoint is
named automatically with the next se-
quential waypoint number. If you want to
change the waypoint name, go to step 4.
Otherwise, go to step 6.
Note 1:
When TLL or FURUNO-TLL is
selected at TLL Output on the NMEA
menu of the System menu, the latitude
and longitude position at the cursor posi-
tion is output to a chart plotter.
Note 2:
Up to 20 waypoints can be regis-
tered. When you attempt to enter more
than 20, the message “Already entered
20 waypoints. No more waypoint can be
entered.” appears. To enter another way-
point, delete an unnecessary waypoint,
referring to section 1.18.3.
4. Press the [ENTER] key to open the way-
point name entry box.
5. Enter the waypoint name (max. 8 charac-
ters) as follows:
1) Use
S
or
T
to set character. Press
S
to select character in order of
0
→
1
→
...
→
9
→
-
→
A
→
...
→
Z
→
_
→
0
→
... Use
T
to select character re-
verse of that order.
2) Use
X
to shift the cursor.
3) Repeat steps 1) and 2) to complete
the name and finally press the [EN-
TER] key.
6. Press the [MENU/ESC] key to close the
window.
1/2
0
0.0
36.8
ft
MANUAL L:2.0/H:2.0
LF
36.8ft 50.0
°
F
/
/
/
: Move + cursor
[ENTER] / [MARK] : Set
[MENU] :
Cancel
Depth and water temperature
at cursor position
20
40
60
Waypoint entry
window
Cursor
