Furuno FCV-288, Operator'S Manual

Page: 22 / 56

1. OPERATION
14
1.18 Setting Up Nav
Data Displays
The user may arrange the nav data displays
as desired.
1.18.1 Nav data displays
1. Rotate the MODE knob to select the Nav
data display to change. (This window is
displayed for 10 seconds.)
2. Use
S
or
T
to select a data display win-
dow desired.
3. Use
W
or
X
to select the item to display.
The items that can be displayed depend
on the screen division.
4. Press the ENTER key.
Note: Applicable data must be input to
the NMEA port in order to display the data
mentioned in the table below.
Note: When a data is lost 30 sec., the display
shows "- -" at the lost data’s location.
Graphic displays
Digital displays
Necessary data Item
Longitude/latitude posi-
tion Position, course
Bearing Compass, heading
Ship speed Speed over the
ground
Wind speed, wind angle Wind speed, wind
angle
Atmosphericpressure Atmosphericpres-
sure
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Two-data
display
Three-data
display
Four-data
display
Items displayable in (1) - (3): speed (STW)*,
wind speed and direction*, compass*,
heading*, depth, position, course, trip meter,
odometer, water temperature, air pressure,
speed (SOG)*
Items displayable in (4) - (9): depth, position,
speed (SOG), speed (STW), course, trip
meter, odometer, water temperature,
heading, wind speed, wind direction, air
pressure
* = Graphic display
Cse: Course
STBD: Starboard
PORT: Port
STBD
Speed over the ground
Speed thru the water
Wind speed and direction
Bearing
Heading
kn
True(or Apparent)
True(or Mag)
True(or Mag)
kn
kn
: Starboard, : Port
* Wind speed and direction
True: Wind speed and direction when boat is
anchored.
Relative: Wind speed and direction when
boat is in motion.
Note : [- -] appears when respective data is
not received for 30 seconds.
kn
kn
DEPTH
POSITION SPEED (SOG)
SPEED (STW)
COURSE True TRIP METER
ODOMETER
TEMP
HEADING True
WIND SPEED True*
WIND DIR. True* BAROM PRESS
NM
NM
kn
kn
kn